• 聯係人:盧經理
  • 電話:0531-87416018
  • 手機:13853128178
  • 地址:濟南市經十西路藤靳路
  • 口西2公裏
新聞中心當前位置:首頁-新聞中心
    數控機床的構成部件有什麽樣的原理?
    2019-10-10 14:39:16

      麵對各種各樣的數控機床,人們很難選擇。 畢竟,在加工CNC車床時,必須製造指定的工件。 如果機器選擇錯誤,則絕對不可能製造出質量更高的工件。 實際上,當今市場上出現的CNC機床基本上由車床主體,數控裝置和伺服係統組成。

      Faced with a variety of CNC machine tools, it is difficult for people to choose. After all, when CNC lathes are processed, the specified workpiece must be manufactured. If the machine selection is wrong, it is absolutely impossible to produce higher quality workpieces. In fact, the CNC machine tools appearing in the market today are basically composed of lathe body, CNC device and servo system.

      車床身:

      Lathe bed:

      車床的主體是可以加工的機械部件,並且在加工過程中也起著主導作用,包括主體移動部分和進給移動部分,支撐部分等。 隻有將這些零件組合在一起才能使車床體成型並投入使用。 組裝車床主體時,請注意一些輔助設備的功能。 這些輔助設備是必不可少的部分。 如果缺少它們,則無法使用整個機床。

      The main body of the lathe is Machinable mechanical parts, and also plays a leading role in the process of processing, including the main body moving part, the feed moving part, the support part, etc. Only by combining these parts can the lathe body be formed and put into use. When assembling the main body of the lathe, please pay attention to the functions of some auxiliary equipment. These auxiliary devices are an essential part. If they are missing, the whole machine tool cannot be used.

    AG8國際亞遊手機版登錄.jpg

      CNC設備:

      CNC equipment:

      實際上,數控裝置是以計算機係統為核心的程序,在機床上運行的軟件在數控機床中起著主導作用。 如果缺少數控裝置,則整個機床將無法操作。 數控裝置還可以接受加工程序的各種信息,同時進行加工細化和展開,然後發出執行命令。 該驅動程序用於在整個過程中反饋數據,以便以後進行處理。

      In fact, the NC device is a program with computer system as its core, and the software running on the machine plays a leading role in the NC machine tool. If there is no NC device, the whole machine tool will not be able to operate. The NC device can also accept all kinds of information of the processing program, refine and expand the processing at the same time, and then issue execution orders. The driver is used to feedback data throughout the process for later processing.

      服務器係統:

      Server system:

      係統通過驅動電路和執行文件執行數控裝置發出的執行命令,以成功完成數控裝置所需的位移。  CNC車床上的進給驅動係統通常由進給伺服係統代替,這也可以更好地控製CNC設備,這也確保了這些零件以後不會發生故障。

      The system executes the execution commands issued by the NC device through the drive circuit and the execution file to successfully complete the displacement required by the NC device. The feed drive system of CNC lathe is usually replaced by the feed servo system, which can better control the CNC equipment, which also ensures that these parts will not fail in the future.